Frigmac Chilled Water Dispenser With Bubbler & Bottle Filler, Stainless

/
/
Frigmac Chilled Water Dispenser With Bubbler & Bottle Filler, Stainless
Loading...

Frigmac Chilled Water Dispenser With Bubbler & Bottle Filler, Stainless

Model Number: FCJ-293SS
Dimensions: 430mm Wide x 310mm Deep x 1030mm High

Features:

  • Model FCJ-293SS in Stainless Steel Finish
  • This is a floor standing refrigerated water cooler fitted with a bubbler and glass filler
  • It has a 3 litre Stainless Steel water storage tank and produces approximately 15 litres of cold water per hour
  • Fitted internally with a 350kpa pressure reduction valve to control the incoming water pressure
  • A presure lelief valve has been fitted internally to prevent high water pressure caused by thermal expansion from damaging internal pipes and fittings
  • Has a polished stainless steel top designed to prevent splashing and easy access to cleaning of water drain
  • All water lines and fittings are insulated to prevent any condensation
  • The base is stainless steel to support the water cooler and refrigeration system
  • Can be factory fitted internally with a filtration system
  • MODEL FCJ-293SS (stainless steel) is full stainless steel panelling inside and outside
  • MODEL FCJ-293CB (colour bond) front and side panelling is beige colour bond panelling, back panel and inside is stainless steel
  • There is a twelve month warranty with a eighteen month warranty on the refrigeration system

Specification:

Water Supply: Main Water Supply

Dimension (mm): 430 width x 310 depth x 1030 height

Weight: 29kgs

Cooling system: R134a Refrigerant, compressor

Colour: Full Stainless Steel or Beige

Power supply: 220/240 volt, 1 phase, 50hz

Spec Sheet

You may also like

Frigmac Stainless Freestanding Chilled Water Dispenser With Bubbler & Bottle Filler
Model RS40SS DAB
Frigmac Wall Mounted Chilled Water Fountain
Model P8ACY Wheelchair Accessible
Frigmac Large Storage Freestanding Water Dispenser With 80 Ltr Tank
Model LS100
Frigmac Large Storage Freestanding Water Dispenser With 180 Ltr Tank
Model LS200

Quote List

No products in the list

Contact Us

Name(Required)
Only if you have selected Service as type of enquiry.
This field is for validation purposes and should be left unchanged.

Contact Us about Hiring

Name(Required)
This field is for validation purposes and should be left unchanged.